 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Infrared Remote Control Receiver Module Features IRM-36XXG4 Series * Photo detector and preamplifier in one package * High protection ability against EMI (Inner shield) * High immunity against ambient light * Circular lens to improve the receive characteristic. * Line-up for various center carrier frequencies. * Low voltage and low power consumption. * Long reception distance & High sensitivity. * Suitable burst length 150 s * Standard Application Market * Pb free. * The product itself will remain within RoHS compliant version. Descriptions The device is a miniature type infrared remote control system receiver which has been developed and designed by utilizing the most updated IC technology. The PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as an IR filter. The demodulated output signal can directly be decoded by a microprocessor. Applications Light detecting portion of remote control AV instruments such as Audio, TV, VCR, CD, MD, etc. Home appliances such as Air-conditioner, Fan , etc. The other equipments with wireless remote control. CATV set top boxes Multi-media Equipment PART Chip Compound MATERIAL Silicon Epoxy COLOR --Black Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 1 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module Package Dimensions IRM-36XXG4 Series Unit: mm Notes: 1.All dimensions are in millimeters. 2. Tolerances unless dimensions 0.3mm. Available Types for Different Carrier Frequencies Type IRM-3638G4 Carrier Frequency 38 kHz Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 2 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module Absolute Maximum Ratings (Ta=25) Parameter Supply Voltage Operating Temperature Storage Temperature Symbol Vcc Topr Tstg Rating 6 -20 ~ +80 -40 ~ +85 IRM-36XXG4 Series Unit V Notice 4mm from mold Soldering Temperature Tsol 260 body less than 10 seconds Recommended Operating Condition Supply Voltage Rating: Vcc 2.7V to 5.5V Electro-Optical Characteristics (Ta=25, and Vcc=3.0V) Parameter Consumption Current Peak Wavelength Reception Distance Half Angle(Horizontal) Half Angle(Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage Notes: *1: The ray receiving surface at a vertex and relation to the ray axis in the range of = 0 and =45. *2: A range from 30cm to the arrival distance. Average value of 22 pulses. Symbol Icc p L0 L45 h v TH TL VH VL MIN. ----14 6 ----450 450 2.7 --- TYP. 0.8 940 ----45 45 ------0.2 MAX. 1.5 ----------750 750 --0.5 Unit mA nm m deg deg s Condition No signal input At the ray axis*1 At the ray axis*2 s V V Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 3 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module Test Method IRM-36XXG4 Series The specified electro-optical characteristics is satisfied under the following conditions at the controllable distance. Measurement place A place that is nothing of extreme light reflected in the room. External light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee10Lux) Standard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However, the infrared photodiode to be used for the transmitter should be p=940nm, =50nm. Regarding photo diode, sensitivity S=26nA/Lx in case light source temperature 2856K, Ee=100Lx, Vr=5V. Measuring system According to the measuring system shown in Fig.-3 Block Diagram VCC BGR IN 42Kohm Input AGC Post Amp. BPF Waveform Detector & ATC Waveform Rectifier OUT Oscillator AGC Control Fc set Trimming Freq. selection GND Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 4 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module Application Circuit IRM-36XXG4 Series RC Filter should be connected closely between Vcc pin and GND pin. Fig.-1 Transmitter Wave Form D.U.T output Pulse Duty=0.5 Fig.-2 Measuring Method k01 mc02 Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 5 of 12 Prepared byHuayan.Peng tuoV noitceriD lacitreV & latnoziroH fO elgnA : ccV DNG TUO ecnatsiD noissimsnarT :L T.U.D ECIVED FO ESLUP TUPTUO rettimsnarT dradnatS .tcudorp hcae fo ycneuqerf retnec ot detsujda si ycneuqerf reirraC V1.0 0.5+ tuoV epocsollicsO Fu01 1 0 0 k rettimsnarT dradnatS MROF EVAW TUPTUO RETTIMSNAT RI Fig.-3 Measuring System Infrared Remote Control Receiver Module The Notice of Application: IRM-36XXG4 Series Transmission of remote control signal consist of four parts: Encode Part, IR Transmitter Source, IRM device, Decode Part 1. When IRM-36XXG4 code select frequency, it need to well understand the center system of encode part. 2. Strong or weak light of IR Transmitter can affect distance of transmission. 3. When using IRM-36XXG4 device, it requires the composition of code pattern to reach the demand as follows: Minimum Burst length (Tburst) 150 s Minimum Gap Time (Tgap) 250 s Minimum data pause time (Tpause) 8.0 ms 4. It needs to ensure the translation range of decode part if it is applied to the pulse-width range. If the above items hardly assure of its application, it'll cause NG (no good) message from the edge of signal. Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 6 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module IRM-36XXG4 Code Property: Characteristics NEC RC5 RC6 Toshiba Micom Code Sharp Code Sony 12bit Code Sony 15bit Code Sony 20bit Code RCA Code RCMM Code Matsushita Code Mitsubishi Code Zenith Code JVC Code Data Communication IRM-36XXG4 Series IRM-36XXG4 Series + + + + + + + + + + + + + + - Note: +; suitable, *; suitable but with much limitation, -; Not recommend. Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 7 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module IRM-36XXG4 Series Typical Electro-Optical Characteristics Curves Fig.-1 Relative Spectral Sensitivity vs. Wavelenght 100 90 Fig.-2 Relative Transmission Distance vs. Direction 100 100 Relative Transmission Distance (%) 80 70 60 50 40 30 20 10 0 600 700 800 900 1000 1100 Relative Transmission Distance (%) 80 60 40 20 0 90 80 70 60 50 40 30 20 10 0 -60 -60 -40 -40 -20-20 00 Relative Responsitibity (%) 20 20 40 40 60 60 Wavelength (nm) Fig.-3 Output Pulse Length vs. Arrival Distance 800 Fig.-4 Arrival Distance vs. Supply Voltage 25 Output Pulse Widty TwL (usec) 700 Transmission Distance Lc (m) 20 15 600 10 500 5 0 2.7 3.0 3.3 3.5 3.8 4.1 4.4 4.7 5.0 5.3 5.5 400 0 2 4 6 8 10 12 14 16 18 Transmission Distance Lc (m) Supply Voltage Vcc (V) Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Prepared byHuayan.Peng Angle Angle (deg) (deg) Page: 8 of 12 Infrared Remote Control Receiver Module IRM-36XXG4 Series Typical Electro-Optical Characteristics Curves Fig.-5 Relative Transmission Distance vs. Center Carrier Frequency 100 Fig.-6 Arrival Distance vs. Ambient Temperature 25 Transmission Distance Lc (m) 20 25 30 35 40 45 50 90 20 Relative Distance (%) 80 15 70 10 60 5 0 -40 50 -20 0 20 40 60 80 100 Carrier Frequency (KHz) Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 9 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module IRM-36XXG4 Series Reliability Test Item and Condition The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Items Test Conditions 1 cycle -40 +100 Failure Judgment Samples(n) Criteria Defective(c) Temperature cycle (15min)(5min)(15min) 300 cycle test Temp: +100 Vcc:6V 1000hrs Temp: -40 1000hrs Ta: 85,RH:85% 1000hrs Temp: 2605 10sec L: Lower specification limit L0 Lx0.8 L45 Lx0.8 n=22,c=0 High temperature test Low temperature storage High temperature High humidity n=22,c=0 n=22,c=0 n=22,c=0 Solder heat 4mm From the bottom of the package. n=22,c=0 Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 10 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module ESD Precaution IRM-36XXG4 Series Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. ESD Characteristics Human Body Model All pin 2000V above Machine Model All pin 200V above Spec. MIL-883C,Method 3015.7 HBM : 2000V MM: 200V Packing Quantity Specification 1. 1500PCS/1Box 2. 10Boxes/1Carton Label Form Specification CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place IRM-3638G4 Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 11 of 12 Prepared byHuayan.Peng Infrared Remote Control Receiver Module Notes IRM-36XXG4 Series 1. The specifications in this datasheet may be changed without notice. EVERLIGHT reserves the authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for use as outlined in this datasheet. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in this datasheet. 3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device NoSZDMO-036-113 http://www.everlight.com Prepared dateJan. 18, 08 Rev 1 Page: 12 of 12 Prepared byHuayan.Peng |
Price & Availability of IRM-3638G4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |